# Install N1ED module for Drupal

> Install the N1ED module on Drupal 9, 10 or 11 with Composer: full N1ED on CKEditor 4, the blocks with the file manager and image editor on CKEditor 5.

Source: https://n1ed.com/docs/install/drupal  
Section: Installation > Drupal  
Updated: 2026-11-11  
Every page of n1ed.com has a Markdown copy at its URL + `.md` (`index.md` after a URL that ends in `/`); all of them are in one file: https://n1ed.com/llms-full.txt

*Looking for [Drupal 8 installation](https://n1ed.com/docs/install/drupal-8)?*

The N1ED module adds N1ED to the text formats of your Drupal site and lets you configure it from the Drupal admin panel. One module serves Drupal 9, Drupal 10 and Drupal 11. What it adds depends on the editor a text format uses:

- **CKEditor 4: the full N1ED.** Bootstrap blocks and grid, widgets, the file manager and the image editor. Drupal 9 has CKEditor 4 in core, Drupal 10 gets it from the contributed [CKEditor 4 module](https://www.drupal.org/project/ckeditor). There is no CKEditor 4 for Drupal 11.
- **CKEditor 5: the blocks with the file manager and the image editor.** The blocks get their controls around the editor, the file manager its three toolbar buttons, in the editor Drupal 10 and Drupal 11 use by default.

*The page shows these as tabs, one at a time: CKEditor 4: full N1ED, CKEditor 5: blocks and file manager.*

## CKEditor 4: full N1ED

### Step 1: Download N1ED module using Composer

Run it in the root of your Drupal project. On **Drupal 10**, require the CKEditor 4 module too:

```bash
composer require drupal/ckeditor drupal/n1ed
```

On **Drupal 9** CKEditor 4 is part of core, so the module alone is enough:

```bash
composer require drupal/n1ed
```

### Step 2: Enable Drupal module

In **Extend**, tick **N1ED** (and **CKEditor** on Drupal 10) and press **Install**. Or with Drush:

```bash
drush en ckeditor n1ed
```

- [![Enabling the N1ED module on the Extend page of Drupal](https://n1ed.com/img/screenshots/docs/integrations/drupal/thumbs/enable-n1ed-module.jpg)](https://n1ed.com/img/screenshots/docs/integrations/drupal/enable-n1ed-module.png)

  *Extend: enable the N1ED module*

### Step 3: Configure text formats

Open **Configuration → Content authoring → Text formats and editors** and press **Configure** next to **Full HTML**: N1ED writes Bootstrap classes and attributes, and a format that limits HTML would strip them.

Choose **CKEditor** as the **Text editor** (a Drupal 10 format starts on CKEditor 5) and press **Save configuration**. N1ED is on for every CKEditor 4 format, and the N1ED panel under the editor select can switch it off for this one.

- [![The Full HTML text format in Drupal on CKEditor 4, with the N1ED panel under the editor select](https://n1ed.com/img/screenshots/docs/integrations/drupal/thumbs/full-html-ckeditor-4-n1ed.jpg)](https://n1ed.com/img/screenshots/docs/integrations/drupal/full-html-ckeditor-4-n1ed.png)

  *Full HTML on CKEditor 4, with the N1ED panel*

### Step 4: Set API key

In the N1ED panel of the same form, press **Set API key** and paste a key from your [Dashboard](https://n1ed.com/dashboard). No account yet? The Register new account link next to it creates one for free.

The key links your site to its configuration in the Dashboard: the toolbar, widgets, blocks and the file storage. Until you set it, the module runs on a shared demo key.

- [![The Set API key dialog of the N1ED module in the Drupal admin panel](https://n1ed.com/img/screenshots/docs/integrations/drupal/thumbs/set-n1ed-api-key.jpg)](https://n1ed.com/img/screenshots/docs/integrations/drupal/set-n1ed-api-key.png)

  *Set API key: paste a key from your Dashboard*

### ✓ Check your installation

Open **Content → Add content → Basic page** and choose **Full HTML** under the body field: the field reloads in N1ED.

- [![A Drupal Basic page edited in CKEditor 4 with N1ED: Bootstrap blocks with the grid outlined](https://n1ed.com/img/screenshots/docs/integrations/drupal/thumbs/ckeditor-4-n1ed-bootstrap-editor.jpg)](https://n1ed.com/img/screenshots/docs/integrations/drupal/ckeditor-4-n1ed-bootstrap-editor.png)

  *A Basic page in CKEditor 4 with N1ED: Bootstrap blocks and the grid*

## CKEditor 5: blocks and file manager

### Step 1: Download and enable the module

Run it in the root of your Drupal project:

```bash
composer require drupal/n1ed
drush en n1ed
```

Instead of the Drush command, you can tick **N1ED** in **Extend** and press **Install**.

- [![Enabling the N1ED module on the Extend page of Drupal](https://n1ed.com/img/screenshots/docs/integrations/drupal/thumbs/enable-n1ed-module.jpg)](https://n1ed.com/img/screenshots/docs/integrations/drupal/enable-n1ed-module.png)

  *Extend: enable the N1ED module*

### Step 2: Add the buttons to the toolbar

Open **Configuration → Content authoring → Text formats and editors** and press **Configure** next to **Full HTML**. Keep it on **CKEditor 5** and drag the three buttons of the module from **Available buttons** into the **Active toolbar**:

- **Upload image or file**
- **Insert image or file**: the file manager
- **Edit image**: the image editor

Press **Save configuration**.

- [![CKEditor 5 toolbar configuration in Drupal with the Upload, Insert and Edit image buttons of the N1ED module](https://n1ed.com/img/screenshots/docs/integrations/drupal/thumbs/ckeditor-5-file-manager-buttons.jpg)](https://n1ed.com/img/screenshots/docs/integrations/drupal/ckeditor-5-file-manager-buttons.png)

  *CKEditor 5: the three buttons on the toolbar, the Flmngr panel above*

### Step 3: Set API key

The same form shows a **Flmngr** panel. Press **Set API key** there and paste a key from your [Dashboard](https://n1ed.com/dashboard), or use the Register new account link to create one for free.

The file manager needs a key of your own: on the shared demo key, its button asks you to get one first.

### ✓ Check your installation

Edit a Basic page in Full HTML: **Browse image or file** opens the file manager, and **Edit image** opens the selected image in the image editor.

- [![The Flmngr file manager opened from the CKEditor 5 toolbar of a Drupal node form](https://n1ed.com/img/screenshots/docs/integrations/drupal/thumbs/ckeditor-5-flmngr-file-manager.jpg)](https://n1ed.com/img/screenshots/docs/integrations/drupal/ckeditor-5-flmngr-file-manager.png)

  *CKEditor 5: the file manager, opened from the toolbar*

The module does more than the editor: image and file fields can pick files with the same file manager (see the [module overview](https://n1ed.com/docs/install/drupal/module-overview)), and N1ED works inside [Paragraphs](https://n1ed.com/docs/install/drupal/paragraphs).

## Configuration

The module keeps one setting per text format: N1ED on or off. Everything else, the toolbar, widgets, Bootstrap blocks and the file storage, is configured for your API key in the Dashboard.

[Dashboard](https://n1ed.com/dashboard)

## Examples

N1ED in CKEditor 4 as the module runs it, live with its code, and the demos of Flmngr, the file manager the CKEditor 5 buttons open.

- [CKEditor 4 plugin: N1ED added to your own CKEditor 4](https://n1ed.com/docs/examples/ckeditor)
- [Flmngr demos: the file manager's own demos, on flmngr.com](https://n1ed.com/docs/examples/file-manager)
